Furniture assembly in Kristiine, Tallinn

Kristiine has a varied housing stock. Examples include Paldiski mnt 35/1 (1905, two storeys), Tulbi tn 4 (1932, three storeys), Endla tn 55 (1971, five storeys) and Meriski tn 4 (2021, five storeys). Buildings from different decades also stand alongside one another in Järve: Järve tn 1 dates from 1924, Järve tn 48 from 1955, Tuisu tn 9 from 1980 and Elektroni tn 4 from 2006.

The same furniture can therefore require different preparation. In one home, finding a suitable way to carry long parts upstairs matters most; in another, work around finished surfaces needs agreeing beforehand. Building age provides context, but we use actual measurements to establish the dimensions and layout of the particular apartment.

When replacing furniture in an older building, measure the room after the previous wardrobe or kitchen has been removed. A skirting board, a projection below a window, an uneven corner or a partition added later can change the usable wall width. For a wardrobe in a recess, check the width at several points and allow the clearance needed for installation.

If wall shelves, kitchen cabinets or tall shelving need fixing, tell us what you know about the partitions. Following renovation, an internal wall may differ from the building's original construction. The fixing position and installation method are assessed separately rather than assumed from the address alone.

We assemble ready-made modular kitchens, install carcasses, fronts and drawers, and adjust the fittings. For an initial quote, send the kitchen plan, wall lengths and module list, and specify any work needed on the worktop or appliances. We need to know whether finishing work is complete and where water connections, ventilation and sockets are located.

For a bedroom or children's room, book a wardrobe, lift-up bed, dresser and desk for one visit. In a small room, we first choose where to lay out the parts and then plan the assembly order. A large carcass cannot always be fully assembled on the floor and simply lifted upright: the required ceiling clearance depends on the model.

In Kristiine, we also assemble furniture for home workspaces: a desk with a drawer unit, computer chair, document cupboard and open shelving. For several workstations, a layout plan and quantities of matching items are useful. If cable trays or upper storage units are included, send the desk model beforehand.

For a separate office, we can agree a phased assembly plan while the premises remain in use. Details of the work are available on our office furniture assembly page.

Before the visit, send the address, floor, lift information and entrance photos if access may be difficult. State whether the furniture is already in the correct room, whether old items need dismantling and whether there are restrictions on noisy working hours.

A model list, box count and photos of the space help us agree the price. Send an enquiry using the form below. If you are still choosing a wardrobe or kitchen, you can start by sending measurements and a few furniture options.